9.22.2009

benetton B192 -07

The floor plan was decalled with sms carbon fiber decals.
As the decals are too much greyish, I airbrushed a mixture of 80% smoke+20% semigloss black to turn them darker. I like the final result.
I glued the front and rear wings.
I built the engine and glued it on the floor plan. As the engine won't be visible, I didn't put too effort to detail it and I also take off some parts to have a better fitment of the cowling.
Finally I glued the cowling to the body. I'll start the decalling job tonight.

9.14.2009

benetton B192 -06

I applied all decals on the rims, glued the air valves and clearcoated them with two layers of TS-13.
The moulding line on the tyres were sanded.
I airbrushed the logos on the tyres using a template and weathered them with a mist coat of smoke+flat black.
I masked the sidepods and airbrushed them with semigloss black.
The copckit was glued in its place and finished the nose cone decal.
I scratchbuilt the brakes wiring using vynil tub and cooper wire.
Finally I glued the front suspension arms.

9.07.2009

benetton B192 -05

I couldn't wait to make a test fitting... the car looks promising.
The inner parts were airbrushed with semigloss black and I applied the front nose decal.
I worked on the dashboard and the steering painting the switches using a toothpick.
I put the decals and glued the parts. The dashboard is finished.
I also started the work on the wheels. I drilled a Ø0.4mm hole where the air valves will be placed.
Finally, I applied the decals on the rims. Tonight I will apply the rims logo decals, the tyre valves and I'll wait some days to airbrush a clear coat. Then, I will airbrush the tyre logos using a template.

9.01.2009

benetton B192 - 04

After some days of holidays I started working on the car again. I turned crazy looking for the green paint can... it was sold out in all my local stores. Finally I could get one!
I decided to paint the green parts instead of using the decals provided, so I masked all the yellow parts.
Two layers of white primer were painted.
Then I lightly sanded the primer paint and applied 2+2 coats of green.
And the masks are off. The result is OK and I only have to sand the joint between the two colours. I'll wait some days and then I will mask the body again and paint the black inner parts. In the meanwhile I'll start working on the engine.

7.30.2009

benetton B192 -03

I started to work on the seat. I used the p.e. seatbelt hardware set from KA models and I took the clothes from an old perfect parts set.
I cut a string guitar in a 6mm long piece and used it to build the harness.
I sanded the excess using the rotary tool.
Here are the seatbelts finished. I also used the sabelt decals from the perfect parts set.
I also scratchbuilt the radio connector.
And the seat is finished.
All parts of the body were painted with three layers of chrome yellow (TS-47). Once dried, I'll mask and paint the green parts instead of using the decals. As you can see, I also received the top studio detail set to build the mclaren mp4/13. It's really great! I'll make a review of it soon! can't wait to start working on the mp4/13 detailed car......

7.19.2009

benetton B192 -02

Today I received the camel logo decals from meddiamixhobby.
I made a first fitting test before paint the body with primer.
The gaps on the seat are filled with putty and I painted it with two layers of grey primer.
All body parts are also painted with 2 layers of white primer. Tomorrow I will start working on the engine parts.

7.14.2009

benetton B192 -01

New project has started! Tamiya's 1/20 benetton-ford b192. Michael Schumacher won his first GP driving this car in Spa-Francorchamps (1992)
The tamiya kit is great with a lot of details and, as usual in them, it doesn't provide the camel logo decals, wich I've ordered and I'm waiting to receive soon.
I started sanding the molded seatbelts on the seat. It needs some putty to fill the gaps and some more sanding.
I glued the different parts that must be attached to the body and hardly sanded the joint.
I also glued the parts to the cowling and drilled the holes. Nest step will be apply two coats of primer over all body parts.



6.06.2009

ferrari 126CK -04

The car is finished. The fujimi kit is really great and all pieces fit perfectly. I must say that they really did a good job with this model.












Next car will be the tamiya's benneton-ford B192 driven by Michael Schumacher in 1992. The B192 gave him his first GP victory.

6.04.2009

ferrari 126CK -03

The decalling job has finished and the sliding skirts are glued in their place. I built the anti-roll bar and glued the front wing.
The rear wing is also close to be finished. Next step will be clearcoating with TS-13.
Some little wiring job is done and I also glued the kill-switch.

6.02.2009

ferrari 126CK -02

I airbrushed the windshield with clear blue, and painted the interior of the cowling with white, and also started the decalling job.
Fujimi made a big mistake on the tyre decals. As you can see it says "michlin" instead of "michelin". I tried to send them a mail but I had no response. I also didn't like how looked the decals on the tyres.
I took the tyre letters template from the Renault R30b studio27's p.e. set and airbrushed the logos. I know that's not very accurate to the real car, but I'm more satisfied with this result than applying the wrong decals.
I also painted the right and left marks and airbrushed a light coat of matt black over the tyres.
Finally I glued the cowling to the body. Tonight I will work on the rear wing and also on the sliding skirts.